← Prev   |   Next →
Home   /   Victron Energy   /   Victron Energy Lynx Smart BMS

Victron Energy Lynx Smart BMS

$955.40 $1,124.00

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. It is available in two versions: 500A (with M8 busbar connections) and 1000A (with M10 busbar connections).

  • Built-in 500A or 1000A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.
  • Battery monitor, indicating state of charge percentage and more data.
  • Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
  • Bluetooth for use with our VictronConnect App, for setup and monitoring, including Instant Readout - key data of the BMS at-a-glance.
  • Local and remote monitoring using a Victron GX device, for example the Cerbo GX or Ekrano GX.

The Lynx Smart BMS is part of the modular Lynx Distribution system.

POWER

Battery Voltage Range- 9 -60VDC

Maximum Input Voltage- 75VDC

Supported System Voltages- 12V, 24V, 48V

Reverse Polarity Protection- No

Main Safety Contactor Continuous Current Rating-

  • 500A - 500A Continuous
  • 1000A- 1000A Continuous 

Main Safety Contactor Peak Current Rating-

  • 500A-  600A for 5 minutes
  • 1000A- 1200A for 5 minutes

Power Consumption OFF Mode- 0.3 mA for all system voltages

Power Consumption in Standby Mode- Approximately 0.6W (50 mA at 12V)

Power Consumption in ON Mode- 

  • 500A- Approx. 2.6W (217mA at 12V) Depending on the state of the relays
  • 1000A- Approx. 4.2W (350mA at 12V) Depending on the state of the relays

Minimum Load Resistance For Pre-Charging- 10Ω and above for 12V systems, 20Ω and above for 24V and 48V systems

Aux Output Maximum Current Rating- 1.1A continuous, protected by resettable fuse

Allow-to-Charge Port Maximum Current Rating- 0.5A at 60VDC, Protected by resettable fuse

Allow-to-Discharge Port Maximum Current Rating- 0.5A at 60VDC, Protected by resettable fuse

Alarm Relay (SPDT) Maximum Current Rating- 2A at 60VDC

CONNECTIONS

Busbar- 

  • 500A- M8 (Torque: 14Nm)
  • 1000A- M10 (Torque: 17Nm)

VE.Can- RJ45

I/O- Removable multi-connector with screws terminals

Battery BTV Cables- Male and Female circular 3-pole connector with M8 screw ring Up to 20 Batteries can be connected in one system

Lynx Distributor Fuse Monitoring (Up to 4 modules)- RJ10 (cable ships with each Lynx Distributor)

PHYSICAL

Enclosure Material- ABS

Enclosure Dimensions (HxWxD)-

  • 500A- 7.48" x 7.08" x 3.14"
  • 1000A- 9.05" x 7.08" x 3.93"

Unit Weight-

  • 500A- 4.18lb
  • 1000A- 5.95lb

Busbar Material- Tinned Copper

Busbar Height- 0.31" x 1.18"

ENVIRONMENTAL

Operating Temperature Range- -40°F - 140°F

Storage Temperature Range- -40°F - 140°F

Humidity- Max. 95% (Non-Condensing)

Protection Class- IP22

STANDARDS

Safety- EN-IEC 63000:2018

EMC- EN-IEC 61000-6-3:2007 / A1:2011/ AC:2012

QMS- NEN-EN-ISO 9001:2015