150A ANL Fuse Kit with 12 inch 4AWG Jumper Cable

150A ANL Fuse Kit with 12 inch 4AWG Jumper Cable

Do you have a power inverter that is rated for 1500 watts @ 12V DC or below?  Having the proper fuse kit can keep your cable, battery and inverter safe and can help them last much, much longer.  The 150A ANL Fuse Kit with 12 inch 4AWG Jumper Cable is the perfect match for this situation.  Not only does this kit have the 150A ANL fuse, fuse holder and cover, but it has the 12 inch 4AWG jumper cable to keep that fuse close to the battery.  If you have a 24V DC or 48V DC power inverter, please see the "overview" to determine proper fuse sizing. 

150A ANL Fuse Kit with 12 inch 4AWG Jumper Cable Overview:

• Made in the USA!
• Use for 12V DC power inverters up to 1500 watts and using 4AWG battery cable
• Use for 24V DC power inverters up to 3000 watts and using 4AWG battery cable
• Use for 48V DC power inverters up to 6000 watts and using 4AWG battery cable
• Includes 12 inch 4AWG jumper cable, 150A fuse, fuse holder and cover
• PVC (polyvinyl-chloride) insulation
• Voltage rating of 600 volts
• RoHS compliant
• Approved for UL 1232/1283/1346/10269
• VW-1 & moisture resistant
• Set contains one red and one black cable with 5/16" lugs at each end

150A ANL Fuse Kit with 12 inch 4AWG Jumper Cables Specifications:

• 5/16" Stainless Steel Posts with stainless steel lock washers
• Brass flat washer
• Cable Length: 1 Foot
• Fuse Current Rating: 150A
• Voltage Rating: 600 Volts
• Operational Temperature Range: -67°F to 275°F (-55°C to 135°C)
• Dielectric strength: 500 V/mil (197 kV/cm)
• Tensile strength: 1500 psi (141 kg/cm2)
• Volume resistivity: 1014 ohm-cm
• Specifications: AMS-DTL-23053/5, CL 1 and CL 3; UL 224, VW-1; CSA 198, OFT
• Battery Lug Crimp Warranty: Lifetime