MAGNUM MS2012 12V 2000W Off-Grid Inverter with 100A Charger

Out of Stock W/ 12-14 Week Lead Time

The MAGNUM MS2012 Inverter/Charger is robust enough to meet the most demanding off-grid needs.  The MS2012 meets all of the strict standards of UL458 for mobile use and UL1741 for renewable energy installs.  The integrated 100A charger is Power Factor Corrected (PFC) which means that it uses 25-30% less energy from your generator.  Free Shipping in the continental US!

Input Battery Voltage Range- 9 - 16.8VDC

AC Output Voltage Accuracy- 120 VAC ± 5%

Output Frequency And Accuracy- 60 Hz ± 0.1Hz

Total Harmonic Distortion (THD)- <5%

1 Msec Surge Current (amps AC)- 50

100 Msec Surge Current (amps AC)- 33

5 Sec Surge Power (real watts)- 3300

30 Sec Surge Power (real watts)- 3100

5 Minute Surge Power (real watts)- 2800

30 Minute Surge Power (real watts)- 2200

Output Power (continuous watts)- 2000

Maximum Continuous Input Current- 267 ADC

Inverter Efficiency (peak)- 90.6%

AC Relay Transfer Time (minimum)- 16 msecs

Power Consumption- Searching- <8 watts

Power Consumption- Inverting (no load)- 25 watts

Output Waveform- Pure Sine Wave


Continuous Output at 25°C- 100ADC

Charge Efficiency- 85%

Power Factor- >.95

Input Current For Continuous Rated Output- 15 AAC


Transfer Relay Capability- 30 ACC max. each input (30AC total on MS2000 models, 60ACC total on all other models)

Five Stage Charging Capability- Bulk, Absorb, Float, Equalize (requires remote) and battery saver

Battery Temperature Compensation- Standard with available temp sensor connected (battery temp 0-50°C)

Internal Cooling- 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans

Overcurrent Protection- Yes, with two overlapping circuits

Overtemperature Protection- Yes on transformer, MOSFETS, and battery

Corrosion Protection- Yes, PCB's conformal coated, powder coated chassis/top, and stainless steel fasteners

Branch-Rated Output Circuit Breakers- Optional on the MS2000 (15 or 20 amp breakers), MS2012 (15 or 20 amp breakers) or MS4048 (20 amp breakers)

Warranty- Three years parts and labor


Dimensions (LxWxH)- 13.75" x 12.85" x 8.0"

Mounting- Shelf or wall (vents not allowed to face downward unless ME-CB or MMP/MP is installed)

Unit Weight- 42lbs

Shipping Weight- 48lbs

Max Operating Altitude- 15,000"

Temperature (Operating/Non-Operating)- -20° - 60°C, -40° - 70°C

Operating Humidity- 0 - 95% RH non-condensing