Victron Energy SmartSolar MPPT 150/70-Tr VE.Can Charge Controller w/ Bluetooth

The Victron Energy SmartSolar MPPT 150/70-Tr VE.Can uses the newest and fastest technology to convert energy to charge battery banks. This charge controller will even charge very low battery levels. 

  • Ultra-Fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection in case of partial shading conditions
  • Flexible Charge Algorithm
  • Bluetooth Smart built-in (control and monitor remotely)
  • Internal temperature sensor 
  • Fully discharged battery recovery function
  • Remote on-off
  • Battery Voltage: 12V/24V/48V Auto Select (software tool needed for 36V)
  • Rated Charging Current:  70A
  • Maximum PV Short Circuit Current:  50A
  • Maximum PV Open Circuit Voltage:  150V
  • Nominal PV Power (12V System):  1000W
  • Nominal PV Power (24V System):  2000W
  • Nominal PV Power (36V System):  3000W
  • Nominal PV Power (48V System):  4000W
  • Operating Temperature Range: -30 to 60°C (-22 to 140°F)
  • Maximum Efficiency:  98%
  • Self-Consumption:  <35mA @ 12V / 20mA @ 48V
  • Data Communication Port:  VE.Can, VE.Direct or Bluetooth
  • Charging Algorithm:  Multi-Stage
  • Charging Voltage (Absorption):  14.4V / 28.8V / 43.2V / 57.6V (adjustable)
  • Charging Voltage (Float):  13.8V / 27.6V / 41.4V / 55.2V (adjustable)
  • Charging Voltage (Equalization):  16.2V / 32.4V / 48.6V / 64.8V (adjustable)
  • Terminal Connection Size:  2AWG (35mm²)
  • Unit Height:  7.28 in (185mm)
  • Unit Width:  9.84 in (250mm)
  • Unit Depth:  3.74 in (95mm)
  • Weight:  6.6 lbs (3 kg)

Safety:  EN/IEC 62109-1, UL 1741, CSA C22.2

1a) If more PV power is connected, the controller will limit input power.

1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V.

2) A PV array with a higher short circuit current may damage the controller.

3) MC4 models: several splitter pairs may be needed to parallel the strings of solar panels Maximum current per MC4 connector: 30A (the MC4 connectors are parallel connected to one MPPT tracker).