Home   /   Products   /   Victron Energy IP65 SmartShunts

Victron Energy IP65 SmartShunts

$100.30 $118.00

The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.

The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.

Supply Voltage Range- 6.5 - 70VDC

Current Draw- < 1mA

Input Voltage Range, Auxiliary Battery- 6.5 - 70VDC

Battery Capacity- 1 - 9999Ah

Operating Temperature Range- -40°F - 120°F

Measures Voltage Of Second Battery, Or Temperature, Or Midpoint- Yes

Temperature Measurement Range- -20°C + 50°C

VE.Direct Communication Port- Yes

RESOLUTIONS & ACCURACY

Current- ±0.0.1A

Voltage- ±0.01V

Amp Hours- ±0.1Ah

State Of Charge (0-100%)- ±0.1%

Time To Go- ± 1 Minute

Temperature (If Optional Temperature Sensor Is Connected)- ± 1°C/°F (0°C - 50°C or 30°F - 120°F)

Accuracy Of Current Measurement- ± 0.4%

Offset- 

  • 500A/50mV = Less than 20mA
  • 1000A/50mV = Less than 40mA
  • 2000A/mV = Less than 80mA

Accuracy Of Voltage Measurement- ±0.3%

INSTALLATION & DIMENSIONS

Dimensions (hxWxD)-

  • 500A/50mV = 1.81" x 4.72" x 2.12"
  • 1000A/50mV = 2.67" x  6.61" x  2.95"
  • 2000A/50mV = 2.67" x 6.61" x 3.39"

Shunt Connection Bolts- M10 (0.3937 Inch)

Protection Category- IP65

STANDARDS

Safety- EN 60335-1

Emission / Immunity- EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3

Automotive- EN 50498

Cables- Two 1.5m cables with 1A fuse, for '+' connection and starter battery or midpoint connection

VE.Direct Cable- 1.5m cable with a VE.Direct socket. Note that a (Not Included) VE.Direct cable is needed to connect a GX device

Temperature Sensor- Optional (ASS000100000)

A Note Regarding The Range Of The Bluetooth Signal- The shunt and the electric cablese do negatively influence the range of the Bluetooth signal. The resulting range of 10 - 15 meters is however satisfactory in most cases. 
The proximity of other electrically conducting elements, such as the metal chassis of a vehicle or seawater around the hull if a boat, may reduce the range of the Bluetooth signal to an unacceptable level. The solution in such a case is to add a VE.Direct Bluetooth Dongle (ASS03536011) to the system, and to switch off Bluetooth in the SmartShunt.

STORED TRENDS

Data Stored- Battery voltage, Current, State of Charge % as well as the Aux input (Battery temperature, or midpoint deviation, or starter battery voltage).

Number of Days Trends Data is Stored- 46