Home   /   Products   /   Victron Energy Lynx Smart BMS 500

Victron Energy Lynx Smart BMS 500

$955.40 $1,124.00

The new Victron Energy Lynx Smart BMS is a battery management system for Victron Lithium Smart Batteries. (12.8V and 25.6V). This Lynx Smart has great features and complete options. 

  • Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch.
  • Battery monitor, indicating state of charge, percentage, and more data. 
  • Pre-alarm signal: Provides warning before systems shuts down.
  • Bluetooth with the Victron Connect App
  • Local and remote monitoring using a Victron GX device (Cerbo, Touch 50, etc).

POWER

Battery Voltage Range- 9-58Vdc

Maximum Input Voltage- 75Vdc

Supported System Voltages- 12V, 24V, 48V

Reverse Polarity Protection- No

Main Safety Contactor Continuous Current Rating- 500Adc Continuous

Main Safety Contactor Peak Current Rating- 600A for 5 minutes

Power Consumption OFF Mode- 0.3mA for all system voltages

Power Consumption In Standby Mode- Approximately 0.6W (50mA at 12V)

Power Consumption In ON Mode- Approx. 2.6W (217mA at 12V) depending on the state of the relays

Minimum Load Resistance For Pre-Charging- 10Ω and above for 12V systems, 20Ω and above for 24V and 48V systems

AUX Output Maximum Current Rating- 1.1A Continuous, protected by resettable fuse

Allow-To-Charge Port Maximum Current Rating- 0.5A at 60Vdc, protected by resettable fuse

Alarm Relay (SPDT) Maximum Current Rating- 2A at 60Vdc

CONNECTIONS

Busbar- M8 (Torque: 10Nm)

VE.Can- RJ45

I/O- Removable multi-connector with screw terminals

Battery BTV Cables- Male and Female circular 3-pole connector with M8 screw ring. Up to 20 batteries can be connected in one system

Lynx Distributor Fuse Monitoring (Up to 4 modules)- RJ10 (cable ships with each Lynx Distributor)

PHYSICAL

Enclosure Material- ABS

Enclosure Dimensions (HxWxD)- 190 x 180 x 80mm

Unit Weight- 1.9kg

Busbar Material- Tinned Copper

Busbar Dimensions (HxW)- 8 x 30mm

ENVIRONMENTAL

Operating Temperature- -40°F - 140°F

Storage Temperature- -40° - 140°F

Humidity- Max. 95% (non-condensing)

Protection Class- IP22