PowerControl / Power Assist-
Three Phase and Parallel Operation- Yes
Transfer Switch- 16A
INVERTER
Input Voltage Range- 9.5 - 17V, 19 - 33V, 38 - 66V
Output-
Cont. Output Power at 25°C³-
Cont. Output Power at 25°C-
Cont. Output Power at 40°C-
Cont. Output Power at 65°C-
Peak Power-
Maximum Efficiency-
Zero-Load Power-
Zero Load Power In Search Mode-
CHARGER
AC Input-
Protection- a - g
VE.Bus Communication Port- For Parallel and three phase operation, remote monitoring and system integration (RJ45-spliter ASS030065510 needed for 500, 800, and 1200 VA models)
Remote On-Off- On/Off/ Charger only
DIP Switches- Yes
Internal DC Fuse-
Common Characteristics-
ENCLOSURE
Common Characteristics-
Battery-Connection-
230V AC-Connection- G-ST18i connector
Weight-
Dimensions (LxHxW)-
STANDARDS
Safety- EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission Immunity- EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive Directive- ECE R10-5
1) Can be adjusted to 60Hz and to 240V 2) Protection: a. Output short circuit b. Overload c. Battery voltage too high d. Battery voltage too low e. Temperature too high f. 230VAC on inverter output g. Input voltage ripple too high 3) Non-linear load, crest factor 3:1 4) Up to 25°C ambient 5) Programmable relay which can be set for: general alarm, DC under voltage or generator start/stop signal function AC rating: 230V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC 6) Remote / battery charge voltage / inverter frequency / search mode 7) Battery charge voltage / search mode