Victron Energy Smart BatteryProtect With Bluetooth


The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.

Maximum Continuous Load Current- 

  • 65A - 65A
  • 100A - 100A
  • 220A - 220A
  • 48V 100A- 100A

Peak Current (During 30 Seconds)-

  • 65A - 250A
  • 100A - 600A
  • 220A - 600A
  • 48V 100A- 250A

Operating Voltage Range - 

  • 12/24V- 6 - 35V 
  • 48V 100A- 24 - 70V

Current Consumption-

12/24V-

  • Ble On- When on: 1.4mA, When off or low voltage shut down 0.9mA
  • Ble Off- When on: 1.2mA, When off or low voltage shut down 0.7mA

48V 100A-

  • Ble On- When on: 1.9mA When off or low voltage shutdown: 1.7mA
  • Ble Off- When on: 1.7mA When off or low voltage shutdown: 1.6mA

Alarm Output Delay- 12 Seconds

Maximum Load On Alarm Output- 50mA (short circuit proof)

Load Disconnect Delay- 90 Seconds (Immediate if triggered by the VE.Bus BMS)

Load Reconnect Delay- 30 Seconds

Default Thresholds- 

12/24V-

  • Disengage- 10.5V or 21V
  • Engage- 12V or 24V

48V 100A- 

  • Disengage: 42V
  • Engage: 48V

Operating Temperature Range- Full load: -40°C - 40°C (Up to 60% of nominal load at 50°C)

IP Rating-

  • Electronics- IP67 (potted)
  • Connections- IP00

Connections-

  • 65A - M6
  • 100A - M8
  • 220A - M8
  • 48V 100A- M8

Mounting Torque- 

  • 65A - 5Nm
  • 100A - 9Nm
  • 220A - 9Nm
  • 48V 100A- 9Nm

Weight- 

  • 65A - 0.5lbs
  • 100A - 0.6lbs
  • 220A - 1.8lbs
  • 48V 100A- 1.8lbs

Dimensions (HxWxD)-

  • 65A - 1.6"  x 1.9" x 4.2"
  • 100A - 2.4" x 1.7" x 4.6"
  • 220A - 2.5" x 4.9" x 4.8"
  • 48V 100A- 2.5" x 4.9" x 4.8"